|
|
|
| Material Safety Data Sheet –
PeelawayTM |
| Product Name |
: |
PEELAWAY |
| Chemical Family |
: |
Solvent mixture |
| Hazardous Material |
: |
Methanol, methylene chloride, isopropanol |
| Non-Hazardous Material |
: |
Protected under NJ trade |
|
| HEALTH HAZARD INFORMATION: |
Product may get absorbed by skin which will produce redness, itching. May cause corneal injury of eyes. May cause irritation to respiratory tract inhalation may cause headache, dizziness rapid heartbeat and possible death also. Ingestion can result in damage of digestive system and depression of central nervous system.
Chronic:
Long term exposure has caused damage to liver, kidney and central nervous system. Aggravates respiratory condition. Aggravates arrythmias, angina and psoriasis.
First Aid
Inhalation:
Remove from the area to fresh air. If not breathing, clear airway and start mouth to mouth artificial respiration. Get immediate attention.
Eye:
Rinse thoroughly with water and flush for atleast 15 minutes. Get immediate medical attention.
Skin:
Wash with large amounts of water. Contact a physician if irritation persists. Clean clothes and shoes before reuse.
Swallowed:
Do not induce vomiting. Give large quantities of water. Seek medical help
Advice to physician: Treat patient symptomatically |
| PHYSICAL DESCRIPTION/PROPERTIES: |
| Appearance |
: |
Light yellow transparent liquid |
| Boiling Point |
: |
IBP 105 degrees Fahrenheit |
| Vapour pressure |
: |
350mm Hg at 25 degrees Celsius |
| Specific Gravity |
: |
1.20 at 25 degree Celsius |
| Viscosity |
: |
Viscous |
| Flash point |
: |
177.5 farenhiet(or)80 degree celsius |
| Solubility in water |
: |
Negligible |
| pH |
: |
> or = 12.0 |
| Vapor density |
: |
2.0 |
| Evaporation Rate |
: |
14 |
|
| REACTIVITY DATA: |
Avoid heat, hot surfaces, spark and open flame
Incompatibility: Srong acids, alkalis, amines, halogens aldehydes, potassium, aluminium. Thermal decomposition may release oxides of carbon, hydrogen chloride and phosgene
Hazardous Polymerization: N/A
|
| SPILL OR LEAK PROCEDURES: |
Steps to be taken if released / spilled:
Eliminate all sources of ignition, wear proper clothing, dike and contain spill, absorb using an inert material and transfer it to a properly labeled container.
Waste disposal method:
Dispose in accordance with state, federal and local regularations.
|
| SPECIAL PROTECTION INFORMATION: |
Provide adequate local ventilation, use NIOSH approved respiratory mask, PVC or neoprene glove, chemical eye goggles with shields, protective clothing with impervious apron while handling the product. |
| STORAGE AND HANDLING INFORMATION: |
Storage and transport:
Maximum Storage temp: 110 degrees Fahrenheit
Minimum Storage temp: 0 degrees Fahrenheit
Store in closed containers at moderate temperatures
Precautions:
Always store material in the original container. Keep container tightly closed when not in use. Do not store near hot places.
|
|
| |
|
|
