|
|
|
| Material Safety Data Sheet –
VersakleenTM |
| Product Name |
: |
VERSAKLEEN |
| Chemical Family |
: |
Phosphated/Ethoxylated Alcohol Solution |
| Hazardous Material |
: |
Trisodium phosphate, Diethanol Amine, Sodium Tripolyphosphate, Nonylphenyl compound. |
| Non-Hazardous Material |
: |
Protected under NJ trade |
|
| HEALTH HAZARD INFORMATION: |
Ingestion causes severe burns of the mucous membranes of the mouth, esophagus and stomach, pain in the throat and stomach with difficulty in swallowing, intense thirst, nausea and vomiting followed by diarrhea are common. In severe cases, collapse and unconsciousness follow this. Eye contact causes severe irritation and painful burns of the eyes and eyelids. Inhalation of excessive concentration of vapours or mists causes coughing and respiratory irritation.
Chronic:
Target organs: Heart, Liver, Kidneys, Spleen, Central Nervous System. Repeated contact may cause dermatitis.
First Aid
Inhalation:
Remove from the area to fresh air. If not breathing, clear airway and start mouth to mouth artificial respiration. Get immediate attention.
Eye
:
Rinse thoroughly with water and flush for atleast 15 minutes. Get immediate medical attention.
Skin:
Wash with large amounts of water. Contact a physician if irritation persists. Clean clothes and shoes before reuse.
Swallowed:
Do not induce vomiting. Give large quantities of water. Seek medical help.Advice to physician: None |
| PHYSICAL DESCRIPTION/PROPERTIES: |
| Appearance |
: |
Dark pink to red transparent liquid |
| Boiling Point |
: |
210 degrees Fahrenheit |
| Vapour pressure |
: |
20mm Hg at 25 degrees Celsius |
| Specific Gravity |
: |
1.03 at 25 degree Celsius |
| Viscosity |
: |
Medium Viscous |
| Flammability |
: |
Non-Flammable (flash point: N/A) |
| Solubility in water |
: |
Complete |
| pH |
: |
9.8 – 10.2 |
| Vapor density |
: |
0.6 |
|
| REACTIVITY DATA: |
Incompatibility: Chlorine compounds, Zinc, Sodium thiosulphate, other strong reducers, acids and bases.
Hazardous Polymerization: N/A
|
| SPILL OR LEAK PROCEDURES: |
Steps to be taken if released / spilled:
Contain the material by diking with an inert material and keep it away in a labeled container. Wash area with water.
Waste disposal method:
Dispose in accordance with state, federal and local regularations. |
| SPECIAL PROTECTION INFORMATION: |
Provide adequate ventilation, use NIOSH approved respiratory mask, PVC or plastic hand glove, eye goggles, protective clothing while handling the product. |
| STORAGE AND HANDLING INFORMATION: |
Storage and transport:
Maximum Storage temp: 120 degrees Fahrenheit
Minimum Storage temp: 35 degrees Fahrenheit
Store in a cool dry well ventilated area in the original container.
Precautions:
Always store material in the original container. Keep container tightly closed when not in use. Keep from freezing. If product freezes, slowly warm and thoroughly stir before using.
Other Precautions:
Rinse the product contacting surfaces with potable water after use.
Read entire label before use.
Keep out of reach of children. |
|
| |
|
