AQL CHLORACT LIQUID OXIDIZING ACTIVATORTM - Specifically Designed For Use with AQL BROMACT

Benefits:

  • Effective at high Ph when used with AQL BROMACT.

DESCRIPTION: 

A Sodium Hypochlorite oxidant, AQL CHLORACT acts as the catalyst for AQL BROMACT.

APPLICATION / DOSAGE:  Please consult the AQL BROMACT label for complete directions.
 
METHOD OF FEED: The delivery system must provide through mixing of AQL BROMACT and AQL CHLORACT. AQL BROMACT should be added to the circulation water just before the AQL CHLORACT.
 
PHYSICAL PROPERTIES:

Appearance (color) : Light yellow green Liquid
Product pH :  12.4
Specific gravity : 1.18
Density : 19.2
Odor : Chlorine.

CAUTION:
MAY CAUSE SKIN AND EYE IRRITATION
MAY CAUSE IRRITATION IF INHALED
MAY BE HARMFUL IF SWALLOWED

Benefits:

  • Effective at high Ph when used with AQL BROMACT 
  • DESCRIPTION: 

    A Sodium Hypochlorite oxidant, AQL CHLORACT acts as the catalyst for AQL BROMACT.

    APPLICATION / DOSAGE:  AQL CHLORACT used to prevent algae & shellfish growth in cooling towers.  In households it is used frequently for the purification and disinfection of the house. It is effective against bacteria, viruses and fungi.  It has the advantage that micro organisms cannot buildup any resistance to it.  It is effective against Legionella bacteria and
    Bio film in which Legionella bacteria can multiply.
     
    METHOD OF USE: Use of AQL CHLORACT spray and home cleaning to reduce indoor allergen levels and improve asthma health parameters.  Preclean all surfaces after use.
    Prior to using equipment, thoroughly spray or fog all surfaces until wet, allowing excess
    Sanitizer to drain.  Vacate area for at least 2 hours.

    Appearance (color) : Light yellow green Liquid
    Product pH :  12.4
    Specific gravity : 1.18
    Density : 19.2
    Odor : Chlorine.

    CAUTION:
    MAY CAUSE SKIN AND EYE IRRITATION
    MAY CAUSE IRRITATION IF INHALED
    MAY BE HARMFUL IF SWALLOWED

    Contains  Sodium Hypo chlorite.  Avoid contact with skin, eyes and clothing.  Wear neoprene rubber gloves if repeated or prolonged skin contact is likely.  Wear safety glasses if the method of application presents the likelihood of eye contact.  Avoid breathing the mist.  Use sufficient ventilation to prevent the buildup of mist.  Wash thoroughly after handling.  Swallowing may cause gastrointestinal irritation seen as nausea, vomiting and diarrhea.

    FIRST AID:

    FOR SKIN CONTACT: Wash affected areas with plenty of soap and water for several minutes.  Seek medical attention if irritation develops.  FOR EYE CONTACT: Rinse the eyes with water.  Remove any contact lenses and continue flushing with plenty of water for several minutes.  Seek medical attention if irritation develops. IF INHALED: Remove from the area to fresh air.  Seek medical attention if respiratory irritation develops, or if breathing becomes difficult.  IF SWALLOWED: Give 3 to 4 glasses of water, but DO NOT induce vomiting.  If vomiting occurs, give fluids again.  Seek medical attention if discomfort occurs.

    KEEP OUT OF THE REACH OF CHILDREN

    STORAGE: Store in a cool, dry place away from heat and direct sunlight to avoid deterioration.

     See the Material Safety Data Sheet for potential chronic hazards and more information.

    For medical or environmental emergencies, call 044-26257499.